3 Product description

3.1 Scope of delivery

• TEQSAS PAN-C
• powerCON®TRUE1 cable Power cable
• powerCON® TRUE1 16A True1-powerCON® TRUE1 32A connector
• Instructions for use

3.2 Your device at a glance

The TEQSAS PAN-C v2, hereinafter referred to as PAN-C, facilitates the use of Coda Audio Linus 12C system amplifiers. The audio inputs and the loudspeaker signal are accessible on the front of the power amplifier. The option of choosing between analogue audio or AES/EBU (AES3) as the input signal means that many inputs and outputs can be accommodated in a 1U device height.

Figure 1 – Front view with inputs und outputs

Figure 2 - Detailed front view with buttons

Figure 3 - Back view

• Front panel connections:
• Audio Inputs
  • Analogue - XLR or RJ45
  • AES/EBU
  • LiNET
  • Network-based audio (if supported by the amplifier)
• Ethernet
  • Connection of the amplifier to the network for Linus Control
  • LiNET-C
• Save
  • Free network connection, e.g. for amplifiers with Dante or other network audio solutions.

• Amplifier Out

  • Output of the loudspeaker channels, each fully assigned, four-pin Neutrik speakON®.

• Rear panel connections:

• Power IN/OUT
  • Neutrik powerCON®TRUE1 16A Input
  • Neutrik powerCON®TRUE1 16A Output
• Amplified Audio
  • Speaker signal from the amplifier to the front panel as four-pin Neutrik speakON®.
• Spare
  • See front panel
• Ethernet
  • See front panel

• Audio Outputs

  • See front panel

• Buttons on the front:

• Analogue | AES/EBU
  • Selection of analogue or AES/EBU at the XLR inputs
• LINET / Ethernet
  • Choice between LiNET (8ch.) via the LiNET sockets or LiNET-C (4ch. + Control) via the Ethernet sockets

Technical data

TEQSAS PAN-C
Permissible ambient temperature for use	0 - 40°C
Permissible ambient temperature for storage	-20 - 50°C
Dimensions	482 × 180 × 44mm
Weight PAN-C	3040gr

The manufacturer reserves the right to make technical changes to the product / product group without prior notice.