1 Before you begin

1.1 Intended use

The LAP-TEQ PLUS ELEVATION sensor is used to determine the correct mounting height of loudspeakers. The LAP-TEQ ELEVATION sensor measures the vertical distance between the device and the surface located directly below it. The measured distance is shown on a separately purchased LAP-TEQ PLUS Display, LAP-TEQ PLUS Interface or a LAP-TEQ Motion System. Any other use that is not described in these instructions for use is unauthorised misuse. The manufacturer is not liable for any damage resulting from this. Never use the device in public traffic (road traffic, aviation, etc.).

1.2 What do the symbols used mean

Hazard warnings and notes are clearly marked in the instructions for use. The following symbols are used:

Danger

Immediate danger to life or injury!

Immediately dangerous situation that will result in death or serious injury.

Warning

Risk of death or injury!

Generally dangerous situation that may result in death or serious injury.

Caution

Potential risk of injury!

Dangerous situation that may result in injury.

Notice

Risk of damage to the appliance!

Situation that may result in material damage.

Note

Information provided for a better understanding of the processes.